• Advertisement

How To Find Out The Right Size Cap Or Pump For Bottle?

不看不知道,一看真奇妙

How To Find Out The Right Size Cap Or Pump For Bottle?

帖子admin » 周三 2月 13, 2019 6:32 pm

https://www.knida.com/find-right-size-cap-pump-bottle/

Before you choose a cap or pump, you need to know the correct size. For example, a 24/410 bottle will only accept a 24/410 closure.

How Are Closures Sizes Defined?

Screw thread closure sizes are expressed with two numbers separated by a hyphen or slash.

The first number refers to the inner diameter of the closure (in mm)as well as the outer diameter of the bottle neck fishish.
How To Measure The Diameter Of A Cap Or Bottle Neck - Cap

How To Measure The Diameter Of A Cap Or Bottle Neck

The second number represents the “GPI” or “SPI” thread finish and refers to the height of the closure relative to the number of thread turns on the container neck. The most common numbers are -400 (one full turn of thread) and 410 (one and a half turns). Some bottles will have a -415 neck which is two full turns.
Common GPI or SPI Neck Fishish For Caps Or Pump Clousres - CapCommon GPI or SPI Neck Fishish For Caps Or Pump Clousres

How To Measure A Neck Finish?

1. Find a cap’s diameter, measuring from one side of the inner wall to the opposite side or calculate a bottle’s neck finish by measuring the diameter of the outermost threads.

2. See how many times the threads pass one another to determine the finish. (ex. diameter 24 mm with 1 thread turn = 24/400 neck finish)
  • 0

Share/分享:
懶得有理_____難得有你
think unique,be special
admin
Site Admin
Site Admin
 
帖子: 3397
注册: 周六 5月 22, 2010 7:54 pm
威望: 0

回到 生活小百科

在线用户

正在浏览此论坛的用户:没有注册用户 和 2 位游客

cron
Reputation System ©'